Use this anti-slip tape to reduce risk of slips in multiple areas around the workplace.
Manufactured from a fine grade aluminium oxide, which makes it suitable for use in a wide range of applications. The grit is a medium anti slip abrasive coating. Our standard safety-grip is great for general anti slip requirements possessing excellent levels of grip (measured as Coefficient of Friction), the safety-grip is water resistant (if applied onto a non-porous surface, we do also offer a complete range of ancillaries) and is easily survives outside or inside
Dimensions: 50mm x 18m
Colours available: Grey, Yellow and Yellow/Grey
Alternative options: 25mm x 18m (FC1801), 100mm x 18m (FC1804) and 150mm x 18m (FC1805)
Faithful Plastic Chain ideal for both internal and external use. Its alternately contrasting colour sections make it particularly useful when specific areas need to be clearly sectioned off.
These plastic chains are supplied in 12.5m reels.
Warning Hazard Type 2 x 3 mtrs : Black protector with
warning stripes.
Prevent accidents caused by loose leads and cables with our cost effective cable management range
Essentially halogen free
Fire retardant to BS476 Part 7 Class 3 and European equivalent DIN 4102 Part 1 and Class B1
Low smoke, non toxic and low fume emission levels in the event of fire
Tested for non conductivity to BS903-C5, 500V
Snap Fit profiles for indoor, floor laid applications
Simply “snap” open the membrane in the base, insert the cables and lay the protector on the floor.
Crysclear profiles
Manufactured from an opaque material designed to blend into any floor covering. Ideal for covering and protecting LED strips.
Split the base with round ended scissors for easy application
Cable Protector Type B Clear x 3 mtrs
Prevent accidents caused by loose leads and cables
with our cost effective cable management range
Essentially halogen free
Fire retardant to BS476 Part 7 Class 3 and European
equivalent DIN 4102 Part 1 and Class B1
Low smoke, non toxic and low fume emission levels
in the event of fire
Tested for non conductivity to BS903-C5, 500V
Snap Fit profiles for indoor, floor laid applications
Simply “snap” open the membrane in the base,
insert the cables and lay the protector on the floor.
Crysclear profiles
Manufactured from an opaque material designed to blend into any floor covering. Ideal for covering and protecting LED strips.
Split the base with round ended scissors for easy application.
