Premium lightweight blue nitrile gauntlet designed for applications where chemical and mechanical protection is required. Excellent resistance against oils, fats, bleaching agents and solvents. 'Lozenge' pattern on palm and fingertips improves grip and performance. Hardwearing glove with superior abrasion resistance. Specially formulated for improved dexterity and minim al finger fatigue. Flock lined for moisture absorption. Suitable for Food Use.

Fully waterproof. Effective handling of slippery and abrasive objects. Resistant to contact heat thanks to its inner cotton lining (250ºC for 15 seconds). The outer coating provides a firm grip on dry, humid and wet surfaces. Suitable for food use. For bacteria and fungi this glove is totally watertight according to EN 374-2: 2014. This glove protects against the following chemicals: Methanol (level 2,> 30 minutes), Sodium Hydroxide 40% (level 2, > 30 minutes), Sulfuric acid 96% (level 3,> 60 minutes), Ammonium hydroxide 25% (level 1,> 10 minutes), Hydrogen peroxide 30% (level 5,> 240 minutes) and Formaldehyde 37% (level 6,> 480 minutes)

• 12” heavyweight gloves • Flock-lined to keep hands dry • Complies with BS EN 374:

• These 12" gauntlets provide comfortable protection when dealing with chemicals.
• Nitrile gauntlets - ideal for protection against oil and chemicals
• Flock-lined to keep hands dry
• Bulk discount when you buy 12 pairs
• Complies with BS EN 374: 2003 and BS EN 388: 2003 - 4101

• These gauntlets provide a good level of protection against a variety of chemicals.
• Unlined and unsupported nitrile provides chemical protection, with resistance to oils, fats and grease
• 455mm long
• Bulk discount when you buy 12 pairs
• Complies with BS EN 374: 2003 and BS EN 388: 2003 - 4102

• Standard weight Red
• 22” Gauntlet
• PVC Fully Coated
• Bulk Discount: 12 Pairs
• Sizes: 9½
• Approved to BS EN 374:2003 & BS EN 388: Abrasion Level 4 Cut Level 1 Tear Level 2 Puncture Level 1

• Resistant to acids & alkalis
• Sizes: 9,10
• Approved to BS EN 374:2003 & BS EN 388: Abrasion Level 4 Cut Level 1 Tear Level 2 Puncture Level 1

• Cotton jersey liner with PVC dipped coating & granular green grip finish on palm
• Actifresh treated gauntlet
• PVC oil resistant
• Approved to BS EN 374:2003 and BS EN 388: Abrasion Level 4 Cut Level 1 Tear Level 2 Puncture Level 1

• The ActivGrip series features a revolutionary surface treatment for superior grip, with suction cups that grip items in dry, wet and oily conditions.
• 13-gauge, polycotton liner with nitrile coating
• Applicable to a variety handling applications which improves worker safety and productivity
• Length: 12" (30cm)
• Complies with BS EN 388: 2003 - 4131

• These gauntlets have a high resistance to abrasion and can withstand lighter cuts and punctures.
• Red, fully-coated PVC
• 18" gauntlets
• Bulk discount when you buy 12 pairs
• Complies with BS EN 374: 2003 and BS EN 388: 2003 - 4121

• The ideal hand protection when welding, these gloves feature high strength stitching and welting for durable wear.
• Cow split leather welders' gloves with inside lining and welting between fingers
• Stitched with Kevlar® thread
• Bulk discount when you buy 12 or 60 pairs
• Complies with BS EN 407: 2004 - 413X4X and BS EN 388: 2003 - 4233 16 inch

• Gren grip finish
• PVC oil resistant
• Bulk discount: 12 pairs Approved to BS EN 374:2003 & BS EN 388: Abrasion Level 4 Cut Level 1 Tear Level 2 Puncture Level 1

• Chemical resistant, low-lint, resistant to deformation and food safe • Fully coated, extra coating over entire hand • Scalloped edge • Rough finish over entire surface

The MaxiDry® range blends comfort and grip with protection from oils providing you a controlled performance in these difficult conditions. A Dual coated drivers style gauntlet ensures full protection from liquids whilst retaining the wet and oily grip. At only 1.00mm thick, the glove is able to retain it's excellent dexterity and natural feel.